Use and Care Manual

3
millheat.com
EN
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on so surfaces, like a bed, where
openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used
or stored.
Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
Always plug heaters directly into a wall outlet/receptacle.
Never use with an extension cord or relocatable power tap
(oulet/power strip).
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision.
Children should be supervsied to ensure that they do not play
with the appliance.
If the SUPPLY CORD is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
WARNING: In order to avoid overheating, do not cover the heater.
The heater must not be located immediately below a socket
outlet.
Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
Pay special attention if the heater is used in rooms where
children, the handicapped or elderly reside, and whenever the
heater is le operating unattended.