KS-3000 B/KS-3000 S keyboard stand user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 05.08.
Table of contents Table of contents 1 General notes............................................................................................................................................... 4 2 Safety instructions..................................................................................................................................... 6 3 Features..............................................................................................................................................
General notes 1 General notes This user manual contains important information on the safe operation of the product. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this product. If you sell the product to another user, be sure that they also receive this manual. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice.
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This keyboard stand is used for the stable and height-adjustable installation of keyboards. Use the product only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Features 3 Features Special characteristics: n n n n n n n Keyboard stand in columnar form for mobile use. Three feet and securing pin for stable standing. Two levels with a capacity of 35 kg each Carrying handle Maximum height: 1.20 m 3/8" thread for optional microphone holder, thread adapter to 5/8" thread included Weight: 7.
Operating elements 4 Operating elements 1 Body. 2 Thread for optional microphone holder. 3 Feet. 4 Securing pin. 5 Locking screw for securing pin. 6 Locking screws for the keyboard rests. 7 Keyboard rests. 8 Carrying handle with locking screws.
Operating 5 Operating Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. CAUTION! Danger of tipping on unsuitable ground If placed on soft or uneven ground, the stand may overturn and cause injuries and property damage.
Operating CAUTION! Danger of tipping during loaded transport If the stand is moved without removing the loaded equipment, the stand may tip over and cause injuries and property damage. Remove all equipment from the stand before moving the stand. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains.
Operating Setting up 1. Place the body (1) on the floor that the rail with the locking screws points downward. Pull the feet (3) of the keyboard stand completely out of the body (1). Then fold the feet outwards until they snap into place. Now set the keyboard stand with its feet on the floor. 2. Loosen the locking screw of the securing pin (5) and slide the securing pin (4) to the ground. Then tighten the locking screw of the securing pin back firmly. 3.
Operating Dismounting 1. Remove your instruments. 2. Loosen the locking screw for the securing pin (5) and slide the securing pin (4) all the way up. Then tighten the locking screw for the securing pin back firmly. 3. Loosen the locking screw (6) of the lower keyboard rest (7) and slide the keyboard rest as far as possible towards the foot of the keyboard stand. Fold up the arms of the lower keyboard rest fully into the recess of the body (1).
Technical specifications 6 Technical specifications Height 1200 mm Rest depth 380 mm Maximum load capacity per level 35 kg Weight 7.7 kg Colour Item no. 265101: Silver Item no.
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
