Getting Started

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 424504_28.11.2017
EN
User manual
This manual contains important information on the safe operation of the product.
Read and follow the safety advice and instructions given. Retain the manual for future
reference. If you pass the product on to others please include this manual.
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
Multi-power supply
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Safety instructions
Intended use
This device is used to supply suitable devices with supply voltage. Any other
use or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts from the product.
They could swallow the pieces and choke! Never let children unattended use
electrical devices.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
Features
• 2×BNC connections for looping through antennas
• USB port for devices with a current draw of up to 850mA
• 5×12V outputs for radio receivers or similar, total load capacity 4A
• Delivery includes 5 connecting cables
Connections
Technical specications
 USB port 5V, 850mA (max.)
 DC outputs 12V, 4A total load capacity
 Impedance BNC input 50Ω
 Impedance BNC output 50Ω
ö # $ % &
) *(
Using the product
1. Connect the POWER INPUT jack (o) to a properly wired AC outlet using the
supplied AC power cord.
2. Connect USB devices you want to supply or charge to the USB charge jack (r).
3. Connect devices that you want to supply or charge with 12V DC with the DC
OUT 12V sockets (u).
4. Press the POWER switch (w) to turn on the unit. The power indicator (q) lights
up then. Press the switch again to turn o the unit.
 Supply voltage 100–240V~50/60Hz
 Dimensions (W×H×D) 212×43×166mm
 Weight 1.0kg
1. BNC1 BNC connection 1, looped-through
to connection BNC1 on the rear
panel
2. POWER On / o switch
3. Power indicator
4. USB charge Port for charging USB devices
5. BNC2 BNC connection 2, looped-through
to connection BNC2 on the rear
panel
6. BNC2 BNC connection 2
7. DC OUT 12V 12V outputs
8. BNC1 BNC connection 1
9. POWER INPUT Connection for power cable
Front panel
Rear panel