Data Sheet

DocID: 378755_05.03.17
Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
EN
Pocket DI 1
This device is intended to be used for impedance conversion and balancing of
signals from musical instruments with electromagnetic pickups. Any other use
or use under other operating conditions is considered to be improper and may
result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are properly disposed of and
are not in the reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts from the product.
They could swallow the pieces and choke! Never let children use electrical
devices unattended.
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after
some time cause permanent dark stains. In case of doubt, do not put the
rubber feet directly on the oor, but use felt-pad oor protectors or a carpet.
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but make sure
that they are collected for recycling. Please follow the notes and markings on the
packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose
of your old device with your normal household waste. Dispose of this
product through an approved waste disposal rm or through your local
waste facility. Comply with the rules and regulations that apply in your country. If
in doubt, consult your local waste disposal facility.
Features
 Passive DI box for keyboards,
electric guitars, basses etc.
 PAD switch to attenuate the input signal
by -20 dB or -40 dB
 Inputs:
– 1 × XLR
– 1 × 1/4" jack
 Outputs:
– 1 × XLR (mixing console, PA)
– 1 × 1/4" jack (monitor, amp)
 Ground / lift switch
 Robust metal housing with rubber
feet for safe stand
 Dimensions (W × H × L):
150 mm × 40 mm × 100 mm
 Weight: 0.5 kg
Connection example: