Manual

page 17 of 40 rev 1.4.2 041409 Millennia Media HV-3R
Overview – Expands the channel control area to
show multiple units. Virtual switches are replaced by
small virtual LEDs. Link switch is replaced by link
group number only. Other attributes are shrunk to
fit. All functions remain accessible and adjustable on
the Overview Screen.
Above is a screen-shot of the OVERVIEW.
Control Section
Basic Navigation and Behavior
The channel controls are grouped into their
respective HV-3R 8-channel Units. The screen shot
on the previous page, shows units #1 and #2. Yo u
can left-click on any unit icon shown in the Unit
Status window to immediately bring that unit’s
channel controls into the main screen.
Note the scroll bar at the bottom of the screen. It
allows the user to quickly scroll to any unit in the
network. You can also move the Control Section by
using the Left and Right arrow keys on the keyboard.
Pressing an arrow key once corresponds to scrolling
in that direction by one channel strip.
Ælogic is always the master control
when the unit is in Remote Mode.
Any changes made in to the unit’s
front panel in the Local mode will be
overwritten when the HV-3R is put
back into Remote Mode.
Overview