Manual

page 37 of 40 rev 1.4.2 041409 Millennia Media HV-3R
Troubleshooting
Problem
Solution
Purple and Red Icons
Trying to set up IDs and IP address while Ælogic is
running. Configure hardware before running the
s o f t w ar e . Close Ælogic and restart it.
HV-3R powers up in Local Mode.
Create and save startup mode
Unit doesn’t appear in Æ l o g ic .
Change mode to Remote on front panel
Parameters saved in the startup register have
changed.
You had been using the unit in LAN mode with auto save
on.
It works in Pro Tools HD until the unit is powered
down and back on.
Create and save startup mode for MIDI.
DHCP doesn’t work.
You need to use a fixed IP address or install a DHCP
server on your network.