User Manual

3-26 EK-5209-5 Evaluation Kit User’s Guide
iB-5209 Network Monitor Operations
View Contents of Event Log File
The following procedure describes how to view the network event log file generated by
iB-5209 Network Monitor, which records node-generated events (see Figure 3-17):
1. From iB-5209 Network Monitor, select View>Log. The log file window displays the
user-defined event log information (see also ’Creating an Event Log File’ on page 3-21).
2. Select one of the following:
– Stop/Restart: Select this toggle option to stop and restart a recording session.
– Clear: Select this option to clear the information currently displayed and start a new
recording session.
– Close: Exit and close the log file display window.
To configure the attributes of the log file that get recorded and displayed, see ’Creating an
Event Log File’ on page 3-21.
Figure 3-17. View contents of event log file
Table 3-3 describes the event keys (see example) displayed in the log file.
example: 04/22 11:00:42.123, EP=001.001 RCV=100, SI=100.0, FH=123.123,
LH=123.123 HC=3, ST=On, A0=1.23, D0=In:2
Table 3-3. Event Log Key Definitions
Key Key Meaning
Sub-
Key
Sub-Key
Meaning
Output to
device example
Input to device
example
A0 ... A3 ADC Channel 0 ... 3 En Enabled A0=En A0=2.12
Dis Disabled A1=Dis
D0 ... D3 Digital I/O Channel 0 ... 3 In Input D0=In D0=In:1
Out Output D1=Out:1
Select View>Log
1
Select Stop/Restart, Clear, or Close
2