User Manual

Building Automation User’s Guide 2-5
Sub-base Router
Sub-base Router Parts
Referring to Figure 2-2, the Sub-base Router is shipped with the following:
1. Sub-base Router
2. Screws (not shown) for mounting the Sub-base Router to the thermostat.
Sub-base Router Specifications
Components
• RS-485: Screw terminal strip for RS-485 + and RS-485 - connections.
• Power: Screw terminal strip for 24 VAC input (from thermostat)
• System LED:
– Device Online: Illuminates solid
– Device Offline: Blinks
Power Requirements
24 VAC @ 50 mA continuous
Dimensions
• Height: 3.7” (95 mm)
• Width: 6.7” (170 mm)
• Depth: 1.1” (28 mm)
Temperature Range
0–55
0
C, operating
Note:
For instructions on installing the Sub-base Router, refer to the Quick Start Guide for
Building Automation (P/N DOC-0010).