Owner`s manual

OM-2248 Page 22
SECTION 8 − PARTS LIST
8-1. Recommended Spare Parts
Description
Part
No.
Item
No.
Recommended Spare Parts
Quantity
Dia.
Mkgs.
245 728 KIT, ICE-12C torch 20 ft handheld (replacement) 1................... .. ....................
208 820 CLAMP, work 1................... .. ...................................................
232 015 FILTER, air intake compressor 1/8 NPT 1................... .. ............................
247 327 CABLE, work 1................... .. ...................................................
and CE markings only apply when the torch is used with shielded parts: retaining cup (197 567) and drag shield (196 929).
S
206 304
206304
Retaining
Cup
197567
Tip
196926
Electrode
196925
Swirl
Ring
196927
O−Ring
196
935
Retaining
Cup
196
928
Drag
Shield
196
929
1/8” (3mm)
stand−of f
recommended
Apply silicone
grease (169 231)
before
installing.
Turn off power before
checking torch parts.
Check before each
use and hourly
during operation.
CAUTION
FAILURETO RE−
PLACEWORNTIP
ORELECTRODE
WILLRUINTORCH
ANDVOID
WARRANTY.
ICE−12C
CONSUMABLES
S
S
Figure 8-1. Consumable Parts For ICE-12C
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
A complete Parts List is available on-line at www.MillerWelds.com