Owner`s manual

OM-223 194 Page 10

3-4. Installing Gas Supply

Ref. ST-148 265-B / Ref. ST-149 827-B / Ref. ST-158 697-A

Gas

Argon Gas

Chain gas cylinder to running gear,

wall, or other stationary support so

cylinder cannot fall and break off

valve.

1 Regulator/Flow Gauge

Install so face is vertical.

2 Gas Hose Connection

3 Flow Adjust

Typical flow rate is 20 cfh (cubic

feet per hour). Check wire man-

ufacturer’s recommended flow

rate. This flow gauge can be

adjusted between 5 and 25 cfh.

3-5. Installing Wire Spool and Adjusting Hub Tension

ST-072573-B

When a slight force is needed to turn spool, tension is set.

15/16 in

Tools Needed: