Owner`s manual

OM-236 948 Page 17
SECTION 4 − SPECIFICATIONS
4-1. Weld, Power, And Engine Specifications
Welding
Mode
Weld Output
Range
Rated Welding
Output
Maximum
Open-
Circuit
Voltage
Generator Power
Rating
Engine
Fuel
Capacity
CC/DC
Stick: 40 − 410 A
TIG: 20 − 410 A
400 A, 23 Volts DC,
30% Duty Cycle
300 A, 32 Volts DC
60% Duty Cycle
250 A, 30 Volts DC
100% Duty cycle
65
Single-Phase,
10 kVA/kW, 84/42 A,
120/240 V AC,
60 Hz
Catepillar C1.5
Water−Cooled
Three−Cylinder
21.7 HP Diesel Engine
OR
Perkins 403D-15
Water-Cooled,
Three-Cylinder,
21.7 HP Diesel Engine
11.5 gal
(43.5 L)
CV/DC 14 − 40 V
400 A, 23 Volts DC,
30% Duty Cycle
300 A, 29 Volts DC
60% Duty Cycle
250 A, 26.5 Volts DC
100% Duty cycle
4-2. Dimensions, Weights, And Operating Angles
Dimensions
Front Panel End
B
A
F
E
H
G
C
D
! Do not exceed tilt angles or engine could
be damaged or unit could tip.
! Do not move or operate unit where it
could tip.
20°
20°
30°
30°
Height
32 in. (813 mm)
35-3/4 in. (908 mm)
(to top of lift eye)
Width
26-1/4 in. (667 mm)
(mtg. brackets turned in)
28-3/4 in. (730 mm)
(mtg. brackets turned out)
Depth 56 in. (1422 mm)
A 56 in. (1422 mm)
B 54 in. (1372 mm)
C 52 in. (1321 mm)
D 2 in. (51 mm)
E 26 in. (660 mm)
F 7/8 in. (22 mm)
G 27-3/4 in. (705 mm)
H
9/16 in. (14 mm) Dia.
4 Holes
Weight
No fuel: 1111 lb (504 kg)
w/ fuel: 1210 lb (549 kg)
Lifting Eye Weight Rating:
1500 lb (680 Kg) Maximum