user manual

 Complete Parts List available at www.MillerWelds.com
OM-4417 Page 25
SECTION 8 − MAINTENANCE
 Follow the storage procedure in the engine owner’s manual if the unit will not be used for an extended period.
8-1. Routine Maintenance
! Stop engine before maintaining.
 See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
 = Check  = Change  = Clean  = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-3,
5-4
 Fuel Level  Oil Level  Oil, Fuel Spills
Every
25
Hours
Section 8-2
 Air Cleaner Precleaner
Every
50
Hours
 Weld Terminals
Every
100
Hours
Engine
Manual,
Section 8-2
 Oil  Air Cleaner Element  Cooling System  Spark Plug Gap
 Battery Terminals (DX
Models)
 Spark Arrestor Screen
(Optional on DX Models)
Every
200
Hours
 Unreadable Labels
Every
300
Hours
Engine
Manual
Valve Clearance*
Every
500
Hours
Engine
Manual
 Weld Cables  Slip Rings*
 Brushes*