Owner`s manual

15
 If operator must leave operator’s station (standing at the steering handle) he must
1. Stop Auger from turning.
2. Shut OFF engine. Shut off engine by depressing any Emergency
Stop button on the machine.
3. Lower machine using three (3) Wheel Height Adjustment Cranks
until the Auger Housing Assembly engages the ground and the Curb
Machine is immobile.
 This equipment is not intended to be towed. NO TOWING.
 Refer to “Lifting and Tie down Instructions” section of this manual and machine
decals. Note the three (3) ways a Curbilder may be lifted and tied down and the
appropriate lifting and tie down points for each method. Note the specific load
ratings for chains, straps, and forklifts.
 Avoid all operating conditions where you, the operator, and/or other people can
become trapped or pinched between the Curbilder and some other obstacle or
where a Curbilder lifted by a crane etc. can fall on you or when loading the
Curbilder onto a trailer.
 A Curbilder cannot be operated in areas with flammable or explosive
atmospheres. Refer to code of Federal Regulations (OSHA.) 29 CFR Part
1910.178 to determine permissible areas where these Curbilders may be
operated.
Keep hands clear of auger during operation of Curbilder. Rotating auger
contact can cause injury or death. Keep away!