Owner`s manual

D. To lift Curbilder equipped with optional lifting lug:

 To lift the Curbilder use a crane / hoist / chains rated at a 1,500# Working Load

and:

 Position hook / chain through lifting lug eye.

Note: There are two lifting lug attaching positions. If the Curbilder is set up

to extrude on the left side of the machine, the lifting lug is to be attached in

the left set of mounting holes. If the Curbilder is set up to extrude on the

right hand side of the machine, the lifting lug is to be attached to the right set

of mounting holes. Torque lifting lug mounting bolts to 60 FT LBS.