Owner`s manual

C) On Models MC-850, MC-900:

Locate the two (2) Grey Battery Cable Plugs at the Left side of the Engine. Orient the

Plugs so they will connect together with the correct +/- polarity. Push the two (2) plugs

together until they are fully engaged and snapped into position. Replace Hopper and

Engine Cover.

4) Attach the Steering/Brake Handle to the Front Wheel Assembly on the same side of the

machine that the Auger assembly is located. Use 3/8”-16NC Hex Head Cap Screw x 3-3/4”

Long with Nylock lock nut. For Curbilders with Solid Front Wheels assemble the Handle in

the two (2) holes in the fork of the Front Wheel Assembly toward the Rear of the machine.

For Curbilders with Pneumatic Front Wheels assemble the Handle in the two(2) holes in the

fork of the Front Wheel Assembly toward the Front of the machine. Tighten bolt so the

Handle pivots smoothly without binding.