Owner`s manual

5) Attach Curb Form to the end of the Compaction Tube using three (3) ½”-13NC Hex Head

Cap Screw with Split Lock Washer and Hex Nut. Then turn the “Tee” Handled Curb Form

Hold Down bolt clockwise until the end of the bolt makes firm contact with the end of the

Curb Form. DO NOT OVERTIGHTEN THIS “T” BOLT.

6) Fill the engine with the proper grade and amount of motor oil. Refer to the Engine Owner’s

Manual.

7) Lube all grease fittings. See the “Maintenance Section”.