Owner`s manual

Sidewinder
®
MiniSpool™ Gun Owner's Manual - Page 6
Testing The Gun
Motor Check
Disconnect 4-pin CPC.
Checktheresistanceacrosspins“3”and“4”.Theresistanceacrossthe
motor should be between 15-25 ohms.
If an open circuit or short exists, check the motor leads and motor
independently of each other. Replace the defective part.
Testing the Micro Switch
Checkforcontinuityacrosspins“1”and“2”whenthetriggerispulled.The
signal should be open when the trigger is released.