Specifications

10
SNATCH BLOCKS & SIDE PULLERS
Gunnebo Johnson® offers the best snatch block
for the money. They all come with a bronze bushing
that can be greased with the exception of the 2 ton
block which cannot be greased. They have an easy
to remove screw pin for installation, and secure
safely. We feel that once you’ve had the opportunity
to use one of these superbly designed blocks that
you’ll agree, Gunnebo Johnson® is the only choice.
SNATCH BLOCK LATCHES
These cast latches fit our Gunnebo
Johnson® snatch block hooks. They
have an easy to attach pin with e-clip
designed for easy maintenance and
replacement. Mounting instructions and
hardware included.
174017126 2 ton
174017125 4 ton
174017124 8 ton
174017127 12 ton
Part Number Rating Sheave Dia Cable Size Weight
174017121 2 TON 3" 5/16 - 3/8" 9 lb.
124001016 4 TON 4" 3/8 - 1/2" 17 lb.
124001058 8 TON 6" 5/8 - 3/4" 32 lb.
124001886 12 TON 10" 3/4 - 7/8" 54 lb.
174017136 22 TON 10" 1 - 1 7/8" 128 lb.
SIDE PULLER JR®
The Side Puller Jr® is a 10 lb. vehicle alignment tool consisting of a quick connect-
disconnect pulley that fits into a socket. It eliminates damage to winch drums, side
rails, and even to the trucks bed.
It will save you time and money by making recovering vehicles in parking lots, curb
sides, or wherever you have to do lot of maneuvering to get a vehicle into proper
position to winch it onto your carrier. It will also make it easier to unload a vehicle
lacking tires or wheels by simply wrapping the winch cable around the pulley then
back up to the vehicle using the winch to pull the vehicle off your carrier.
To install Side Puller Jr® use the retainer plate as a template, position it at the rear of
the bed in the center. Cut the hole and mount it. It’s that simple. This device should not
be used for vehicle recovery, consult your owners manual about vehicle recovery with a
car carrier.
174017001 Wt. 10 lb.
SIDE PULLER 2000®
Side Puller 2000® is similar to the Side Puller Jr.® with the exception that the
mounting socket is mounted flush with the carrier bed surface. It has the same
qualities as the Jr., install the pulley in the socket pull the vehicle up or down the
carrier and you’re done. Supplied with mounting hardware and installation
instructions.
174017003 STEEL CARRIER Wt. 11 lb.
174017004 ALUMINUM CARRIER Wt. 11 lb.