Owner`s manual

OM-1036 Page 3
SECTION 4 – OPERATION
READ SAFETY BLOCKS at beginning
of manual before proceeding.
WARNING
4-1. Operating The Gun
Ref. ST-800 749-A
1 Trigger Switch
When pressed, energized wire
feeds and shielding gas flows.
1
Figure 4-1. Using Gun Switch
SECTION 5 – MAINTENANCE & TROUBLESHOOTING
READ SAFETY BLOCKS at beginning
of manual before proceeding.
WARNING
5-1. Maintenance And Troubleshooting
Turn Off all power before maintaining.
3 Months
Control Cord
Gas Hose Gun Cable
– –
Replace
Cracked
Parts
Blow Out
Gun
Casing
Each Spool Of Wire
Clean
Nozzle
And Check
Contact Tip
– –
See
Figure
5-3
Figure 5-1. Routine Maintenance