Owner`s manual

. A complete Parts List is available at www.MillerWelds.com
OM-254 170 Page 17
Input6 2011−03 Ref. 253 558-A / Ref. 254 665-A
4-12. Connecting 120 Volt Input Power
1
! Installation must meet all National and
Local Codes − have only qualified
persons make this installation.
! Special installation may be required
where gasoline or volatile liquids are
present − see NEC Article 511 or CEC Sec-
tion 20.
See rating label on unit and check input voltage
available at site.
. The Auto-Line circuitry in this unit
automatically links the power source to the
primary voltage being applied, either 120 or
240 VAC.
For 120 volts AC input power, a 15 or 20 ampere
individual branch circuit protected by time-delay
fuses or circuit breaker is required.
1 Multi-Voltage Plug Adapter And Power
Cord Connector (NEMA Type 5−15P Plug
Shown)
For multi−voltage plug adapter connections, see
Section 4-11.
2 Receptacle − NEMA Type 5−15R
(Customer Supplied)
2