Owner`s manual

. A complete Parts List is available at www.MillerWelds.com

OM-254 170 Page 21

5-2. Mild Steel Recommended Cut Speed

Recommended Cut Speeds At 40 Amperes Output

Mild Steel

Thickness Approximate Travel Speed*

Inches mm IPM mm/min

1/8 3.2 156 3962

1/4 6.4 64 1626

3/8 9.5 36 914

1/2 12.7 22 559

5/8 15.9 13 330

*Recommended Cut Speed is approximately 80% of maximum.

. Aluminum and stainless steel cut speeds at these thicknesses may be reduced as much as 30%.

Recommended Cut Speeds At 27 Amperes Output

Mild Steel

Thickness Recommended Cut Speeds*

Inches mm IPM mm/min

1/8 3.2 88 2,235

1/4 6.4 28 711

3/8 9.5 15 381

1/2 12.7 8 203

5/8 15.9 5 127

*Recommended Cut Speed is approximately 80% of maximum.

. Aluminum and Stainless Steel cut speeds at these thicknesses may be reduced as much as 20%.

5-3. Trigger Safety Lock

Trigger Locked

Trigger Unlocked

1 Trigger

Ref. 253554-A