Specifications

ManualsBrandsMiller ManualsIndustrialSystem 9A

Miller HV2 Series

Heavy Duty Industrial

Hydraulic Cylinders

Catalog HY08-M1140-3/NA December, 2007

Heavy Duty Service –

Tie Rod Construction

Nominal Pressure – 3000 PSI

Standard Bore Sizes –

1.50" through 20.00"

Piston Rod Diameters –

0.625" through 10.000"

Seventeen Standard Mounting Styles

Summary of content (80 pages)

PAGE 1
Miller HV2 Series Heavy Duty Industrial Hydraulic Cylinders Catalog HY08-M1140-3/NA December, 2007 Heavy Duty Service – Tie Rod Construction Nominal Pressure – 3000 PSI Standard Bore Sizes – 1.50" through 20.00" Piston Rod Diameters – 0.625" through 10.
PAGE 2
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA AV Series Cylinders CHE Series Compact Hydraulic Cylinders Series AV air cylinders are available in bore sizes from 1.50" through 20.00" and up to 250 PSI operating pressure. Standard NFPA dimensions and proven Miller design features. Series CHE compact hydraulic cylinders are available in bore sizes from 20mm through 100mm and up to 140 BAR operating pressure.
PAGE 3
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Table of Contents Table of Contents Page Bore Sizes 1.50"-6.00" 7.00" & 8.00" Large Bores Specifications, Mounting Styles.................................................................................3...................... 21..................... 36-37 Cylinder Features..................................................................................................... 4-5..................... 21........................
PAGE 4
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Features Miller Fluid Power HV2 Series Heavy-Duty Hydraulic Cylinder When the application demands a heavyduty cylinder with maximum performance, specify Miller Fluid Power HV2 Series. This cylinder has standard design features to maximize machine uptime.
PAGE 5
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Specifications / Mountings Standard Specifications • Standard – Externally removable bolted bushing assembly • Heavy Duty Service – ANSI/(NFPA) T3.6.7R2-1996 Mounting and Specification Dimensions • Standard Construction – Square Head – Tie Rod Design • Nominal Pressure – 3000 PSI1 • Standard Fluid – Hydraulic Oil • Standard Temperature – -10° F to +165° F • Bore Sizes – 1.50" through 6.00" • Piston Rod Diameter – 0.625" through 4.
PAGE 6
Miller. . . HV2 Series – your best choice in heavy duty hydraulic cylinders Steel Head – Bored and grooved to provide concentricity for mating parts. End Seal – Pressure-actuated cylinder tube-to-head and cap “O” rings. Primary Seal – New “Tri-Lip” Rod Seal is a proven leak proof design – completely self-compensating and self-relieving to withstand variations and conform to mechanical deflection that may occur.
PAGE 7
Piston Rod – Medium carbon steel, induction case-hardened, hard chrome-plated and polished to 10 RMS finish. Adjustable Floating Stepped Cushions – For maximum performance – economical and flexible for even the most demanding applications – provides superior performance in reducing shock. Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions. Ports – S.A. E.
PAGE 8
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.
PAGE 9
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions Add Stroke EE 2 F 0.38 G 1.75 J 1.50 K 0.38 R 1.63 LG 4.63 P1 2.88 8 0.63 1.75 1.50 0.44 2.05 4.63 2.88 8 0.63 1.75 1.50 0.44 2.55 4.75 3.00 Bore 1.50 AA 2.31 BB 1.383 DD 3/8-24 E 2.50 NPTF 1/2 SAE 8 2.00 2.90 1.813 1/2-20 3.00 1/2 2.50 3.61 1.81 1/2-20 3.50 1/2 1 3.25 4.60 2.31 5/8-18 4.50 3/4 12 0.75 2.
PAGE 10
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Head Rectangular Flange Mount Model 61 Maximum Pressure Rating - PSI Push Application Rod Dia Bore 0.625 5/8 1.000 1 1.375 1 3/8 1.750 1 3/4 2.000 2 1 1/2 1400 1000 – – – 1.50 2 – 2000 1200 – – 2.00 2 1/2 – 700 700 1000 – 2.50 3 1/4 – – 800 800 600 3.25 4 – – – 1000 1000 4.00 5 – – – – 850 5.00 Rod Dia Bore 2.500 2 1/2 3.000 3 3 1/2 4.000 4 5 3.500 5.000 4 700 – – – – 4.00 5 850 450 800 – – 5.
PAGE 11
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE E 2.50 2.00 3.00 1/2 2.50 3.50 1/2 Add Stroke F 0.38 (Bolt) FB3 0.38 G 1.75 J 1.50 K 0.38 R 1.63 TF 3.44 UF 4.25 LB 5.00 LG 4.63 P1 2.88 8 0.63 0.50 1.75 1.50 0.44 2.05 4.13 5.13 5.25 4.63 2.88 8 0.63 0.50 1.75 1.50 0.44 2.55 4.63 5.63 5.38 4.75 3.00 NPTF2 SAE1 1/2 8 Bore 1.50 3.25 4.50 3/4 12 0.75 0.63 2.
PAGE 12
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Maximum Pressure Rating - PSI Pull Application Rod Dia Bore 0.625 1.000 1.375 1.750 2.000 11.50 1/2 2500 3000 – – – 2 – 3000 3000 – – 2.00 22.50 1/2 – 3000 3000 3000 – 33.25 1/4 – – 3000 3000 3000 4 – – – 3000 3000 4.00 5 – – – – 2000 5.00 Rod Dia Bore 2.500 3.000 3.500 4.000 5.000 4 3000 – – – – 4.00 5 2000 2500 3000 – – 5.00 6 1800 2000 2000 2500 – 6.
PAGE 13
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE Bore E 1.50 2.50 1/2 2.00 3.00 1/2 2.50 3.50 1/2 Add Stroke F (Bolt) FB3 G J K R TF UF LG P1 8 0.38 0.38 1.75 1.50 0.38 1.63 3.44 4.25 4.63 2.88 8 0.63 0.50 1.75 1.50 0.44 2.05 4.13 5.13 4.63 2.88 8 0.63 0.50 1.75 1.50 0.44 2.55 4.63 5.63 4.75 3.00 NPTF2 SAE1 3.25 4.50 3/4 12 0.75 0.63 2.00 1.
PAGE 14
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Side Lug Mount Model 72 LG + STROKE US E 4 SW E TS Model 72 cylinders have mounting lugs welded to the head and cap, and are considered to be a fixed mount that does not absorb force on its centerline. The plane of the mounting surface is not through the centerline of the cylinder, and for this reason Model 72 cylinders produce a turning moment as the cylinder applies force to the load.
PAGE 15
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE Add Stroke J 1.50 K 0.38 NT R 3/8-16 1.63 (Bolt) SB3 0.38 ST 0.50 SU 0.94 SW 0.38 TN 0.75 TS 3.25 US 4.00 LG 4.63 P1 2.88 SN 2.88 SS 3.88 0.63 1.75 1.50 0.44 1/2-13 2.05 0.50 0.75 1.25 0.50 0.94 4.00 5.00 4.63 2.88 2.88 3.63 0.63 1.75 1.50 0.44 5/8-11 2.55 0.75 1.00 1.56 0.69 1.31 4.88 6.25 4.75 3.00 3.00 3.
PAGE 16
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Cap Fixed Clevis Mount Model 84 ZC + STROKE P + STROKE LG + STROKE EE Y WF RT E CD 1 MM 2 4 E MR LR K G J L 3 M CW XC + STROKE CB CW Rod End Dimensions (for Retainer Held Bushings) – See Table 2 See B&R Table to determine which bore, rod and mount combinations have this feature.
PAGE 17
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions Bore CB 1.50 0.75 +.000 -.002 CD3 0.501 2.00 1.25 0.751 0.63 3.00 1/2 2.50 1.25 0.751 0.63 3.50 3.25 1.50 1.001 0.75 4.50 4.00 2.00 1.376 1.00 5.00 2.50 1.751 6.00 2.50 2.001 EE CW E 0.50 2.50 Add Stroke F G J K L LR M MR 0.38 1.75 1.50 0.38 0.75 0.56 0.50 0.63 LG 4.63 P1 2.88 8 0.63 1.75 1.50 0.44 1.
PAGE 18
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Head Trunnion Mount Model 81 Maximum Pressure Rating - PSI Bore PSI 1.50 3000 2.00 3000 2.50 3000 3.25 2800 4.00 1800 5.00 1200 6.00 1000 LG + STROKE WF 1/8 R K Cap Trunnion Mount Model 82 Maximum Pressure Rating - PSI Bore PSI 1.50 3000 2.00 3000 2.50 3000 3.25 2800 4.00 1800 5.00 1200 6.
PAGE 19
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Table 1—Envelope and Mounting Dimensions F 0.38 G 1.75 J 1.50 K 0.38 +.000 -.001 TD 1.000 8 0.63 1.75 1.50 0.44 1.375 1.38 3.50 6.25 5.75 4.13 4.63 2.88 0.25 8 0.63 1.75 1.50 0.44 1.375 1.38 4.00 6.75 6.25 4.63 4.75 3.00 0.13 3/4 12 0.75 2.00 1.75 0.56 1.750 1.75 5.00 8.50 8.00 5.81 5.50 3.50 0.38 5.00 3/4 12 0.88 2.00 1.75 0.56 1.750 1.75 5.
PAGE 20
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 1.50" to 6.00" Bore Sizes Intermediate Trunnion Mount Model 87 ZB + STROKE P + STROKE LG + STROKE EE BD Y WF UM E 1 1/8 R UW E MM TD 2 4 J G XI 3 TM TL TL K Table 1—Envelope and Mounting Dimensions Bore BD E NPTF1 SAE2 G J K +.000 -.001 TD TL TM UM UW LB P1 Model 87 Minimum Stroke 4.00 2.25 5.00 3/4 12 2.00 1.75 0.56 2.00 1.75 5.50 9.00 6.00 6.63 3.75 0.125 5.00 2.75 6.
PAGE 21
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Spherical Bearing Mount – 1.50" to 6.00" Bore Cap Fixed Eye Mount with Spherical Bearing Model 94 ZC + STROKE XC + STROKE LUBRICATION FITTING MA F 1 2 4 MS KK 3 NR WF CD EX A Table 1 — Dimensions Add Stroke Bore 1.50 2.00 2.50 3.25 4.00 5.00 6.00 Rod Dia. MM Thread3 Style 4 KK A WF XC ZC 0.625 7/16-20 0.75 1.00 6.38 7.13 1.000 3/4-16 1.13 1.38 6.75 7.50 1.000 3/4-16 1.13 1.38 7.25 8.25 1.
PAGE 22
Spherical Bearing Cylinder Accessories Heavy-Duty Hydraulic Cylinders HV2 Series Miller offers a complete range of Cylinder Accessories to assure you of the greatest versatility in present or future cylinder applications. Accessories offered for the respective cylinder include the Rod Eye, Pivot Pin and Clevis Bracket. To select the proper part number for any desired accessory refer to the charts below. Catalog HY08-M1140-3/NA Bore Sizes Spherical Rod Eye CD Part No.
PAGE 23
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Features / Specifications Series HV2 7.00" and 8.00" Bore Heavy Duty High Pressure Hydraulic Cylinders • Bolted bushing for ease of maintenance. • Hi-Load piston is standard. • Cylinder tube seal groove design and high-strength tie rods ensure trouble-free performance even in severe applications. SAE Ports are standard. • Floating cushions with float-check action and positive metal-to-metal seal.
PAGE 24
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.
PAGE 25
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE 1 2 Add Stroke Bore 7.00 AA 9.31 BB 4.13 DD 1 1/8-12 E 8.50 NPTF2 1 1/4 SAE1 20 G 2.75 J 2.75 K 1.25 R 6.58 LG 8.50 P 5.50 8.00 10.61 4.50 1 1/4-12 9.50 1 1/2 24 3.00 3.00 1.50 7.50 9.50 6.25 SAE straight thread ports are standard and are indicated by port number. NPTF ports are available at no extra charge.
PAGE 26
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Head Rectangular Flange Mount Model 61 ZB + STROKE P + STROKE EE Y Maximum Pressure Rating - PSI Push Application Rod Dia Bore 3.000 3.500 4.000 5.000 5.500 7 1000 800 400 400 – 7.00 8 – 800 700 400 400 8.00 UF 1 E WF 2R 4 MM 3 J G F FB 4 HOLES E TF K LB + STROKE For pressures exceeding those shown use Model 65 or Model 67.
PAGE 27
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE Bore 7.00 E 8.50 NPTF 1 1/4 8.00 9.50 1 1/2 2 SAE 20 1 24 Add Stroke F 1.00 (Bolt) FB3 1.13 G 2.75 J 2.75 K 1.25 R 6.58 TF 10.63 UF 12.63 LB 9.50 LG 8.50 P 5.50 1.00 1.25 3.00 3.00 1.50 7.50 11.81 14.00 10.50 9.50 6.25 1 SAE straight thread ports are standard and are indicated by port number.
PAGE 28
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Cap Rectangular Flange Mount Model 62 Maximum Pressure Rating - PSI Push Application Rod Dia Bore 3.000 3.500 4.000 5.000 5.500 7 2000 2000 2500 3000 – 7.00 8.00 8 – 1700 1700 2200 2500 ZF + STROKE P + STROKE XF + STROKE Y EE UF 1 MM K RT WF G J E 4 R 2 3 F FB 4 HOLES E LG + STROKE TF For pressures exceeding those shown use Model 66 or Model 68.
PAGE 29
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE Bore 7.00 E 8.50 NPTF 1 1/4 8.00 9.50 1 1/2 2 SAE 20 1 24 Add Stroke F 1.00 (Bolt) FB3 1.13 G 2.75 J 2.75 K 1.25 R 6.58 TF 10.63 UF 12.63 LG 8.50 P 5.50 1.00 1.25 3.00 3.00 1.50 7.50 11.81 14.00 9.50 6.25 1 SAE straight thread ports are standard and are indicated by port number. 2 NPTF ports are available at no extra charge.
PAGE 30
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Side Lug Mount Model 72 ZB + STROKE P + STROKE Y WF US LG + STROKE EE 1 E K 4 MM 2 E -.005 2 -.010 ST 3 SW SW TS RT SB 4 HOLES SW E G SW SW J SU XS SU K SW SS + STROKE the cylinder about its mounting bolts.
PAGE 31
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Table 1—Envelope and Mounting Dimensions EE Bore 7.00 E NPTF 8.50 1 1/4 8.00 9.50 2 SAE 20 1 1/2 1 24 G 2.75 J 2.75 (Bolt) K NT SB3 1.25 1 1/2-6 1.50 3.00 3.00 1.50 1 1/2-6 1.50 Add Stroke ST 1.75 SU 2.88 SW 1.38 TN 3.75 1.75 2.88 1.38 4.25 TS US 11.25 14.00 LG P SN SS 8.50 5.50 5.88 5.75 12.25 15.00 9.50 6.25 6.63 6.
PAGE 32
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Head Trunnion Mount Model 81 ZB + STROKE Y Maximum Pressure Rating - PSI Bore PSI 7.00 1100 8.00 1100 P + STROKE WF UT LG + STROKE EE 1 K 1/8 R E 4 TD 2 MM 3 RT E TL Cap Trunnion Mount Model 82 G TL J K XG ZB + STROKE P + STROKE Y Maximum Pressure Rating - PSI Bore PSI 7.00 1100 8.
PAGE 33
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Table 1—Envelope and Mounting Dimensions G 2.75 J 2.75 K 1.25 +.000 -.002 TD 2.500 3.00 3.00 1.50 3.000 EE Bore 7.00 BD 3.00 E NPTF 8.50 1 1/4 8.00 3.50 9.50 2 SAE 20 1 1/2 24 1 Add Stroke TL 2.50 TM 9.75 UM UT UW 14.75 13.50 11.50 LG 8.50 P 5.50 3.00 11.00 17.00 15.50 13.38 9.50 6.25 1 SAE straight thread ports are standard and are indicated by port number.
PAGE 34
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Cap Fixed Clevis Mount Model 84 ZC + STROKE P + STROKE LG + STROKE Y WF EE E CD K MM E MR LR RT G J M L CB CW XC + STROKE CW Table 1—Envelope and Mounting Dimensions Bore 7.00 CB 3.00 +.000 -.002 CD3 2.501 8.00 3.00 3.001 EE Add Stroke CW 1.50 E 8.50 NPTF2 1 1/4 SAE1 20 G 2.75 J 2.75 K 1.25 L 3.00 LR 2.75 M 2.50 MR 2.88 R 6.58 LG 8.50 P 5.50 1.50 9.
PAGE 35
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – 7.00" and 8.00" Bore Sizes Intermediate Trunnion Mount Model 87 ZB + STROKE LG + STROKE UM Y E SQ 1 P + STROKE EE BD 1/8 R 2 MM UW TD 4 3 TM TL RT G XI WF TL J K Table 1—Envelope and Mounting Dimensions Add Stroke Bore BD E NPTF 2 SAE1 G J K +.000 -.001 TD TL TM UM UW LG P Model 87 Minimum Stroke 7.00 4.000 8.50 1 1/4 20 2.75 2.75 1.25 3.500 2.50 9.75 14.75 11.38 8.50 5.50 1.13 8.
PAGE 36
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Double Rod Models / Retainer Dimensions How to Use Double Rod Cylinder Dimension Drawings To determine dimensions for a double rod cylinder, first refer to the desired single rod mounting style cylinder shown on preceding pages of this catalog. After selecting necessary dimensions from that drawing return to this page, supplement the single rod dimensions with those shown on drawing and dimension table.
PAGE 37
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Notes NOTES 35 www.millerfluidpower.
PAGE 38
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Features / Specifications Series HV2 Large Bore High Pressure Hydraulic Cylinders Long inboard cast iron bearing is lubricated from within. SAE Ports are standard. Adjustable, floating, stepped cushions. End seal design prevents extrusion. Polypak® Primary Seal Bolt-on rod gland assembly simplifies maintenance. Hi-Load piston is standard – with rugged filled PTFE seals and bearings. Chrome plated piston rod.
PAGE 39
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mountings – Large Bore Sizes Series HV2 Large Bore High Pressure Hydraulic Cylinders Available Mounting Styles Tie Rods Extended Head End Tie Rods Extended Cap End Model 53 10.00"14.00" (NFPA MX3) Model 52 10.00"14.00" (NFPA MX2) Head Rectangular Model 67 10.00"20.00" Model 65 10.00"20.00" Cap Square Flange Model 68 10.00"20.00" (NFPA ME6) Side Lug Model 66 10.00"20.00" Cap Fixed Clevis Model 72 10.00"14.
PAGE 40
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Tie Rod Mountings – Large Bore Sizes Tie Rods Extended Head End Model 53 ZB + STROKE ZJ + STROKE P + STRO KE LG + STROKE EE Y WF E 1 DD AA 2 E 4 MM 3 BB Tie Rods Extended Cap End Model 52 J G K ZJ + STROKE P + STROKE LG + STROKE EE Y WF E 1 DD AA 2 4 E MM 3 K Basic Mounting (Model 50) — Not shown is no tie rod extended and can be supplied upon request.
PAGE 41
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Tie Rod Mounting – Large Bore Sizes Table 1—Envelope and Mounting Dimensions Bore 10.00 AA 13.00 BB DD E 4.13 1 1/8-12 12.63 EEf 2 SAE EE 3 SAE EE1 FLANGE STRAIGHT NPTF PORT THREAD G 2 2 24 3.69 12.00 15.50 4.50 1 1/4-12 14.88 2 1/2 2 1/2 24 4.44 4.44 1.41 6.270 4.555 – 2.38 14.50 10.13 14.00 17.38 4.50 1 1/4-12 17.13 2 1/2 2 1/2 24 4.88 4.88 1.41 7.485 6.143 4.409 2.25 15.63 10.88 Add Stroke J 3.69 K 1.
PAGE 42
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Head Rectangular Mounting Model 67 (10.00"-14.00" Bore) WF 4 E 2 R 3 E Head Rectangular Mounting Model 67 (16.00"-20.00" Bore) FB 4 HOLES WF 2 4 RJ R MM FB 8 HOLES 3 G EX TE RE 1 E WF FB 8 HOLES Rod End Dimensions — see Table 2 Thread Style 4 Thread Style 2 G A (NFPA Style SF) Small Female WF F KK C C KK .515 DIA. x .
PAGE 43
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Table 1—Envelope and Mounting Dimensions Bore 10.00 E 12.63 EB 1.31 EEf 2 SAE EE3 SAE EE1 FLANGE STRAIGHT THREAD EX NPTF PORT 2 2 24 16.63 12.00 14.88 1.56 2 1/2 2 1/2 24 19.75 2.00 4.44 4.44 1.41 11.45 11.75 16.79 18.50 22.00 14.50 10.13 14.00 17.13 1.81 2 1/2 2 1/2 24 21.75 2.25 4.88 4.88 1.41 13.26 12.90 18.43 21.00 25.00 15.63 10.88 Add Stroke (Bolt) FB4 1.75 G 3.
PAGE 44
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Cap Rectangular Mountings Model 68 (10.00"-14.00" Bore) XF + STROKE P + STROKE LG + STROKE EE Y UF WF TF E FB 4 HOLES E Cap Rectangular Mountings Model 68 (16.00"-20.
PAGE 45
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Rod End Dimensions — see Table 2 A Thread Style Thread Style 2 A WF A WF WF 4 (NFPA Style SM) Small Male If rod end is not specified, Style 2 will be furnished. F (NFPA Style SF) KK C Small Female F F C C KK KK .515 DIA. x .75 DEEP 4 HOLES .515 DIA. x .75 DEEP 4 HOLES NA V MM RD B RD MM Use Style 4 for applications where .515 DIA. x .50 DEEP rod ends NAfemale NA 4 HOLES are required.
PAGE 46
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Cap Fixed Clevis Mountings Model 84 ZC + STRO KE P + STROKE LG + STROKE EE Y WF E 1 CD LR 4 MM 2 E MR J G PIVOT PIN FURNISHED WITH CYLINDER K L CW CW M XC + STROKE 3 CB Head Trunnion Mounting Model 81 For Model 81 (10.00"-14.00" Maximum Pressure Bore only) WF UT 1 Rating - PSI Bore PSI 10.00 1600 12.00 1500 14.
PAGE 47
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Mounting Information – Large Bore Sizes Rod End Dimensions — see Table 2 A A WF WF Thread Style 4 Thread Style 2 A WF F F (NFPA Style SM) Small Male C KK B If rod end is not specified, Style 2 will be furnished. KK (NFPA Style SF) C Small Female F C KK MM RD B MM RD .515 DIA. x .75 DEEP 4 HOLES Use Style 4 for .515 DIA. applications where x .50 DEEP NA 4 HOLES rod ends NAfemale V are required. V B .515 DIA. x .
PAGE 48
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Double Rod Models – Large Bore Sizes How to Use Double Rod Cylinder Dimensioned Drawings ZM + 2 x STROKE ZB + STROKE Y Rod End #1 P + STROKE WF Rod End #2 LG + STROKE EE RD MM SU XS Mounting Styles for Single Rod Models 53 52 51 67 65 72 81 891 Dimension Shown on This Page Supplement Dimensions on Pages Listed Below 36, 37 36, 37 36, 37 38, 39 38, 39 40, 41 42, 43 42, 43 If only one end of these Double Rod Cylinders is to be cu
PAGE 49
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Linear Alignment Couplers Linear Alignment Couplers are available in 19 standard thread sizes... Cost Saving Features and Benefits Include...
PAGE 50
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Accessories Cylinder Accessories Miller offers a complete range of cylinder accessories to assure you of the greatest versatility in present and future cylinder applications. Accessory Load Capacity The various accessories have been load rated for your convenience. The load capacity in lbs. is the recommended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot Pin is rated in shear.
PAGE 51
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Accessories Rod Clevis Dimensions CW ER CB CW +.004 CD +.002 Pivot Pin Dimensions CE CL A +.001 CD -.002 KK THREAD 1 2 Part Number A CB CD CE CW ER KK Part Number CD CL 05122100001 0509400000 0509410000 0509420000 1332840000 0509430000 0509440000 1332850000 0509450000 1332860000 0509460000 0509470000 0509480000 0509490000 0509500000 0509510000 0509520000 0509530000 0.81 0.75 0.75 1.13 1.13 1.63 1.63 1.63 1.
PAGE 52
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Accessories Rod End Accessories Accessories offered for the rod end of the cylinder include Rod Clevis, Eye Bracket, Rod Eye, Clevis Bracket, and Pivot Pin. To select the proper part number for any desired accessory, refer to the table below or on the opposite page and look in the row to the right of the rod thread in the first column.
PAGE 53
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Accessories Rod Eye Dimensions ER CD +.004 +.002 A FULL THREAD CD Pivot Pin Dimensions CL CD KK THREAD CD CA +.001 CD -.002 CB Part Number A CA CB CD ER KK Part Number CD CL 0740750000 0690890000 0690900000 0690910000 0690920000 0690930000 0690940000 0690950000 0690960000 0690970000 0690980000 0690990000 0691000000 0735360000 0734370000 0734380000 0734390000 0.75 0.75 0.75 1.13 1.13 1.63 2.00 2.25 2.25 3.00 3.
PAGE 54
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA “Style 9” Piston Rod End Miller “Style 9” Piston Rod End Split Flange Coupling Rod End Simplifies alignment n Reduces assembly time n Allows full rated hydraulic pressure in push and pull directions n Available in 0.625" through 10.000" piston rod diameters n Style 9 Rod End WG AD G VH AE B AM MM AF R 0.06 VF RT OR F DEPENDING ON MOUNTING Dimensions Style 9 Rod End MM Rod Dia. AD AE AF AM WG 0.625 0.63 0.25 0.38 0.
PAGE 55
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA “Style 9” Piston Rod End “Style 9” Piston Rod End Split Couplers and Weld Plates C D F BOLTS Ø E Ø A Ø B STYLE 9 ROD END SPLIT COUPLER WELD PLATE ! WARNING: Piston rod separation from the machine member can result in severe personal injury or even death to nearby personnel. The cylinder user must make sure the weld holding the weld plate to the machine is of sufficient quality and size to hold the intended load.
PAGE 56
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Push and Pull Forces Push and Pull Forces Push Force and Displacement Cyl. Piston Bore Area Size (Inches) (Sq. In.) 1.767 1.50 3.14 2.00 4.91 2.50 8.30 3.25 12.57 4.00 19.64 5.00 28.27 6.00 38.49 7.00 50.27 8.00 78.54 10.00 113.10 12.00 153.94 14.00 201.06 16.00 254.47 18.00 314.16 20.
PAGE 57
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Operating Fluids and Temperature Range leak free seals under static conditions and can tolerate high pressure. The wear rings on the piston can also tolerate high side loads. The dynamic portion of the seal is bronze filled PTFE and compatible with all six classes of service. However, carbon filled PTFE will provide better seal life when used with Class 6 fluids.
PAGE 58
Catalog HY08-M1140-3/NA Pressure Ratings / Style 4 Minimum Stroke Heavy-Duty Hydraulic Cylinders HV2 Series Application Data rod, mounting attitude, the speed of stroke, and how the load in motion will be stopped. Information given here provides pressure rating data for HV2 Series hydraulic cylinders.
PAGE 59
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Weights Cylinder Weights To determine the net weight of a cylinder, first select the proper basic weight for zero stroke, then calculate the weight of the cylinder stroke and add the result to the basic weight. For extra rod extension use piston rod weights per inch shown in Table B.
PAGE 60
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Ports Ports Table B SAE Straight Thread O-Ring Ports HV2 Series cylinders can be supplied with SAE straight O-ring ports or NPTF pipe thread ports. If specified on your order, extra ports can be provided on the sides of heads or caps that are not occupied by mountings or cushion valve. Size No. Tube Thread O.D. (In.) Size 0.13 0.19 0.25 0.31 0.38 0.50 0.
PAGE 61
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Ports Oversize Ports Oversize NPTF or SAE straight thread ports can be provided, at an extra charge. For ports one size larger than standard, welded port bosses which protrude from the side of the head or cap are supplied. For dimensions, see drawings and tables below.
PAGE 62
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Stroke Data, Stroke Adjusters Stroke Data Stroke Adjusters Miller cylinders are available in any practical stroke length. The following information should prove helpful to you in selecting the proper stroke for your cylinder application. Where absolute precision in stroke length is required, a screwed adjustable stop can be supplied.
PAGE 63
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Spherical Bearing Mount Application Application and Design Data The spherical bearing life is influenced by many factors, i.e., bearing pressure, load direction oscillating angle and lubrication. The maximum operating pressure ratings of the spherical bearing mountings are based on standard commercial bearing ratings. The 4:1 design factor rating is based on the tensile strength of the material.
PAGE 64
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Stop Tubing / Mounting Classes Stop Tubing Mounting Classes Stop tube is recommended to lengthen the distance between the bushing and piston to reduce bearing loads when the cylinder is fully extended. This is especially true of horizontally mounted and long stroke cylinders. Long stroke cylinders achieve additional stability through the use of a stop tube. Standard mountings for fluid power cylinders fall into three basic groups.
PAGE 65
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Piston Rod Selection Data How to Use the Chart The selection of a piston rod for thrust (push) conditions requires the following steps: 1. Determine the type of cylinder mounting style and rod end connection to be used. Then consult the chart below and find the “stroke factor” that corresponds to the conditions used. 2.
PAGE 66
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Piston Rod Selection Data Piston Rod — Stroke Selection Chart 1.50" through 8.00" Bore 134 2 12 2 312 3 412 4 512 5 CONSULT FACTORY 138 300 ROD DIAMETER BASIC LENGTH–INCHES 200 1 100 90 80 70 60 7 6 5 4 3 50 40 2 1 5 8 INCHES OF STOP TUBE 30 20 10 100 2 3 4 5 6 7 8 9 1000 2 3 4 5 6 7 8 9 10,000 THRUST–POUNDS 2 3 4 5 6 7 8 9 100,000 2 3 Piston Rod — Stroke Selection Chart 10.00" through 20.
PAGE 67
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Rod Bushing Drain / Thrust Key Mountings Rod Bushing Drain Rod bushing drains permit capture of fluid that may accumulate between the primary rod seal and the wiperseal. A 1/8 NPTF port is provided in the bushing retainer or cylinder head (see table below) for connection of plumbing that flows oil back to the reservoir.
PAGE 68
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA End-of-Stroke Switch End of Stroke Magnetic Principle Type Switch Height Bore Proximity Switch 1.50 Reliable: Proximity type sensor never contacts cylinder moving parts; eliminating wear and adjustments. 2.00 Positive Action: 2.50 Multiple magnet design provides “snap action.” Eliminates creep and false signals.
PAGE 69
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Parts List / Piston and Rod Assemblies 1.50" through 6.00" Bore Sizes 1 74 15 47 42 73 44 7 71 72 69 18 37 70 17 16 48 Parts List — 1.50" through 6.
PAGE 70
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Parts Indentification / Seal Kits 1.50" through 6.
PAGE 71
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Parts Identification / Seal Kits 7.00" & 8.00" Bore Sizes 26 45 41 47 47 26 43 40 14 120 119 121 Parts Identification Sym. No. 14 40 41 43 26 45 Description Bushing Rod Wiper Rod Seal Rod Seal Back Up Washer End Seal Back Up Washer Bushing to Head O-Ring Sym. No.
PAGE 72
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Parts Indentification 10.00" through 20.00" Bore Sizes 117 45 1 26 47 15 37 18 46A 118 121 119 120 55 47 26 7 123 23 27 41 43 40 122 71 69 72 19 138 137 69 70 Sym. No. Sym. No.
PAGE 73
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Parts Identification / Seal Kits 10.00" through 20.00" Bore Sizes 16 48 Optional Cast Iron Piston Ring Kit Operating fluids and temperature range – Fluidpower cylinders are designed for use with pressurized air, hydraulic oil and fire resistant fluids, in some cases special seals are required.
PAGE 74
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Model Numbers How to Order HV2 Series Cylinders Data Required On All Cylinder Orders When ordering HV2 Series cylinders, be sure to specify each of the following requirements: (NOTE: – Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the original cylinder. Factory records supply a quick, positive identification.
PAGE 75
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA How To Order How to Order – Example: HV2 72B2N-04.00-8.000-0175 S11T-0 HV2 72 B 2 N- 04.00 - 8.000 - 0175 S Series Mounting Style Bushing Rod End Style Cushions Bore Dia. Stroke Rod Dia. Port Type HV2 DHV2 (D = Dbl. Rod End) 1 1 Port Location T- 0 Seals Modified S = Head Cap 0= T= SAE End End Standard Standard (Class 1 Seals) N= 1 (Std.
PAGE 76
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Safety Guide Safety Guide for Selecting and Using Hydraulic, Pneumatic Cylinders and Their Accessories WARNING: ! Failure of the cylinder, its parts, its mounting, its connections to other objects, or its controls can result in: • Unanticipated or uncontrolled movement of the cylinder or objects connected to it. • Falling of the cylinder or objects held up by it. • Fluid escaping from the cylinder, potentially at high velocity.
PAGE 77
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Cylinder Safety Guide 3.1.2 – Cylinders operating in an environment where air drying materials are present such as fast-drying chemicals, paint, or weld splatter, or other hazardous conditions such as excessive heat, should have shields installed to prevent damage to the piston rod and piston rod seals. 3.1.
PAGE 78
Catalog HY08-M1140-3/NA Notes Heavy-Duty Hydraulic Cylinders HV2 Series NOTES 76 www.millerfluidpower.
PAGE 79
Heavy-Duty Hydraulic Cylinders HV2 Series Catalog HY08-M1140-3/NA Offer of Sale Offer of Sale The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and Divisions (“Company”) and its authorized distributors, are hereby offered for sale at prices to be established by the Company, its subsidiaries and its authorized distributors.
PAGE 80
Miller Fluid Power 500 South Wolf Road Des Plaines, IL 60016 USA Tel.: (847) 298-2400 Fax: (800) 892-1008 E-mail: MFPCylmktg@parker.com Website: www.millerfluidpower.com Miller Fluid Power 160 Chisholm Drive Milton, Ontario Canada L9T 3G9 Tel.: (905) 693-3000 Fax: (905) 876-1958 All specifications and information subject to change without notice or prior obligation.