Instruction manual

ABOUT THIS ...
ABOUT THIS MANUAL
It is essential that this manual be referred to for proper installation and operation of
your BW100 belt scale integrator. As BW100 must be connected to a belt scale, and
optionally a speed sensor, refer to their manuals as well.
Installation gives you step by step direction for the installation and
interconnection of your BW100.
Start Up instructs you how to operate the keypad, read the display, do a
Quick Program, and perform the calibration for a successful entry
into the run mode.
Recalibration emphasizes how to optimize and maintain accurate operation of your
weighing system through material tests and routine recalibrations.
Operation offers an overview of the BW100 features and functions that allow
you to take full advantage of your weighing system.
Parameters lists the parameters available to you, with a description of their
function and use. You are urged to read this section; to familiarize
yourself with the parameters available to you and get your BW100
working to its fullest.
Appendices what manual would be complete without one! Ours has an
alphabetical cross reference of the parameters to their numbers, a
diagnostic help with the list of error messages, a maintenance
reminder, and a record sheet for jotting down parameter values.
ABOUT THIS ....
PL-531 5