System information

SECTION TWO - FRONT PANEL OPERATION

F1 (Probe) Main-Util-Probe

Note: For machines with the Digitizing option.

If Digitizing is an option and F1 (Probe) is pressed, the following screen will be displayed.

Note: F1 (Probe) is used for XZ or YZ digitizing only.

F1 (Begin) If the input file and output mode have been selected, digitizing will begin. If not,

error message 808 “set up not selected” is displayed.

F3 (In) Displays a menu from which to select a file that contains the guidance

information for digitizing.

F4 (Out) Specifies the output mode for the digitized data. The options are as follows.

F1 - RS232 The primary serial port

F2 - File A CNC file number

F3 - Disk A floppy disk file name