System information

SECTION TWO - FRONT PANEL OPERATION

F2 (XyDig) Main-Util-XyDig

Note: For machines with the Digitizing option.

If Digitizing is installed and F2 (XyDig) is pressed, the following will be displayed.

F1 (Begin) If the input file and output mode have been selected, digitizing will begin. If not,

error message 808 “set up not selected” is displayed.

F3 (In) Displays a menu from which to select a file that contains the guidance

information for digitizing.

F4 (Out) Specifies the output mode for the digitized data. The options are as follows.

F1 - RS232 The primary serial port

F2 - File A CNC file number

F3 - Disk A floppy disk file name

F6 (Close) Will toggle between close and open.

Note: More information on digitizing is available in the digitizing manual.

F3 (Files) Main-Util-Files

The file utilities contain basic program manipulation functions. They are: