System information

SECTION TWO - FRONT PANEL OPERATION

The help key will be used to either select a new drive or to verify a program (based on the

control parameter)

Help (Drive) Displays a list of available drives for a new menu.

Note: If the parameter to extract files is set, a single file on the floppy separated by 0#### can

be loaded and separated into several files. When extracting files being loaded, the

program does not check for files that already exist.

Help (Verf) Will graphically verify the part that the cursor is on.

F2 (Save) Main-Util-Files-Save

The F2 (Save) function is used to save programs from the control's program memory to the

floppy disk.

The F2 (Save) function operates the same as the F1 (Load) function with the exception that the

transfer direction is changed.

F3 (Rename) Main-Util-Files-Rename

The F3 (Rename) function changes the name of a program. The operator will be prompted if the

new filename already exits.

F4 (Copy) Main-Util-Files-Copy

The F4 (Copy) function makes a copy of a program under another name. The operator will be

prompted if the new file already exists.

F5 (

Ram) Main-Util-Files-

Ram

This function is used to load programs from a floppy disk, zip drive or network to the RAM

drive and later DNC'ed from the RAM drive.

Note: Bigger RAM drives are available as an option.

F9 (Erase) Main-Util-Files-Erase

The F9 (Erase) function is used to erase programs from the control's program memory. The keys

available are the same as those in the F2 (Save) option.

F4 (RS232) Main-Util-RS232

The F4 (RS232) utilities contain basic communications functions. They are:

F1 (COM1 or COM 2)

F1(COM1 or COM2) is the primary port.

100