System information

SECTION TWO - FRONT PANEL OPERATION
F4 (Path) Main-Util-Info-Path
F4 (Path) displays the following screen, which shows the path file. In the standard order, these
are the directories for ROM, RAM, Parts, Display, and Floppy. Below the Parts directory is
shown the available parts space in bytes. For the ROM, Parts, and Display directories, the DOS
volume ID for that drive is shown to the right.
Note: The path file is reloaded when the above information is displayed. Therefore, one can
edit the path file then reload it by using this command.
If the paths for parts and/or remote files have been changed from the menus,
they will be stored back to the original paths from PATH.DAT.
Version greater than #.#169 have a “Floppy” path and a “Remote Files” path. The
“Floppy” path is used specifically for saving and loading parameters.
110