System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Each conversational program has a text program associated with it. The conversation program
file starts with letter P followed by four digits such as P1234. The text file starts with the letter O
followed by four digits such as O1234. The text program is created, or posted, from the
conversational program. Changes in the conversational program create a new text program from
the modified conversational program. The operator can view or change the text program, but his
modifications will not be transferred to the conversational program. Reposting the conversational
program will overwrite his modified text program.
This section contains diagrams of the conversational input screens and an explanation of each
screen.
Not all possible combinations of screen inputs are shown; therefore, if additional information
concerning any particular screen or field is required, the appropriate section of the manual should
be referenced.
Fields that are red are required entries. These fields will appear black after the data is entered.
The program setup screen shown below will always appear at the beginning of every program. It
initializes certain important functions so no settings remain from a previously run program.
Program setup
The conversational screen for program set-up appears as follows. It is the first event of every
conversational program.
The main setup keys for conversational programming appear as follows.
114