System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Event 1 of 16
Tool Pierce - Start Mill Cycle
Z Pierce Feedrate [25 ]
Return Point [Clearance]
Clearance [.1 ]
Final Z Depth [-1 ]
1st Z Depth [-.3 ]
Z Increment [.3 ]
X Pierce Point X[0 ]
Y Pierce Point Y[0 ]
Compensation [Left] [Polar]
Angle AB[90 ]
Options [Pocket Clear 1]
XYFeedrate[50 ]
Cut Width [.2 ] Finish Stock[.005 ]
---------------------------------------------------
Event 2 of 16
Mill Geometry - Line
Feedrate F[50 ]
Coordinates [Cartesian]
X-axis X[3 ]
Y-axis Y[0 ]
Z-axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 3 of 16
Mill Geometry - Line
Feedrate F[ ]
Coordinates [Cartesian]
X-axis X[3 ]
Y-axis Y[3 ]
Z-axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
127