System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Event 1 of 7
Tool Pierce - Start Mill Cycle
Z Pierce Feedrate [20 ]
Return Point [Clearance]
Clearance [.1 ]
Final Z Depth [-1 ]
1st Z Depth [-.2 ]
Z Increment [.3 ]
X Pierce Point X[0 ]
Y Pierce Point Y[0 ]
Compensation [Auto Right]
Options [---]
---------------------------------------------------
Event 2 of 7
Mill Geometry - Line
Feedrate F[ ]
Coordinates [Cartesian]
X-axis X[2 ]
Y-axis Y[ ]
Z-axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 3 of 7
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CCW]
Center [Polar]
Arc Radius R[1 ]
Start Angle AA[-90 ]
End Point [Polar]
End Angle AB[90 ]
Z[ ]
End Option [---]
---------------------------------------------------
134