System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Event 4 of 6
3D Geometry - Arc
Plane [XY]
Feedrate F [ ]
Direction [CW]
Center [Abs Center]
Arc Radius R [1 ]
Arc Center XC [3 ]
YC [5 ]
End Point [Absolute]
X [2 ]
Y [5 ]
Z [ ]
---------------------------------------------------
Event 5 of 6
Disable 3d Sweep Cycle
---------------------------------------------------
Event 6 of 6
End of Program
Spindle off [No]
Coolant off [No]
Z to Toolchange [No]
X Position (home relative) [ ]
Y Position (home relative) [ ]
--------------------
-------------------------------
The following graphic illustrates the sample mill program using the 3D sweep cycle.
152