System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Conversational Screens
F3 (Drill) start drill cycle screen has a toggle field to select which type of drilling is to be
executed. The start drill cycle is normally followed by the positions for the holes and ended with
an end drill cycle event. The optional drill cycles are shown below.
Drill
The conversational screen for drill appears as follows.
Note: See page 281, Section 4 for further information on the drill cycle.
Drill/Dwell
The conversational screen for drill/dwell appears as follows.
Note: See page 281, Section 4 for further information on drill/dwell cycle.
158