System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Event 7 of 17
Position Drill
Feedrate [Rapid]
Coordinates [Cartesian]
X axis X[5 ]
Y axis Y[ ] (Z to –1")
Z axis Z[ ]
Grid of Holes [---]
Spaced Holes [---]
---------------------------------------------------
Event 8 of 17
Disable Drill Cycle
---------------------------------------------------
Event 9 of 17
Tool Change
Tool [Change]
Tool Change Position X[ ]
Y[ ]
Tool Number T[2 ]
Tool Description [BORE ]
Next Tool Number [ ]
Spindle Speed S[2000]
Spindle Restart [CW]
Stop For Speed Change [No]
Coolant [Flood]
---------------------------------------------------
Event 10 of 17
Enable Drill Cycle
[Bore Cycle]
Pierce Feedrate F[20 ]
Spindle On CW RPM S[ ]
Return Point [Clearance]
Clearance R[.1 ]
Final Depth [-2 ]
---------------------------------------------------
Event 11 of 17
Position Drill
Feedrate [Rapid]
Coordinates [Cartesian]
169