System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Spaced Holes [---]
---------------------------------------------------
Event 15 of 17
Position Drill
Feedrate [Rapid]
Coordinates [Cartesian]
X axis X[5 ]
Y axis Y[ ] (Z to –1")
Z axis Z[ ]
Grid of Holes [---]
Spaced Holes [---]
---------------------------------------------------
Event 16 of 17
Disable Drill Cycle
---------------------------------------------------
Event 17 of 17
End of Program
Spindle off [Yes]
Coolant off [Yes]
Z to Tool change [Yes]
X Position (home relative) [ ]
Y Position (home relative) [ ]
Note: See page 266, Section 4 for further information on canned cycles.
171