System information

SECTION THREE - CONVERSATIONAL INPUT SCREENS
Event 6 of 12
Pocket Mill Setup
X Pocket Center [0 ]
Y Pocket Center [0 ]
XY Feedrate [10 ]
Z Pierce Feedrate [5 ]
Return Point [Clearance]
Clearance [.1 ]
Final Z Depth [-.4 ]
First Z Depth [-.1 ]
Z Increment [.1 ]
---------------------------------------------------
Event 7 of 12
Circular Finish Inside
Pocket Radius [1 ]
Z Down [Plunge]
Cut Direction [CCW (Climb)]
Compensation [On]
---------------------------------------------------
Event 8 of 12
End Subroutine
---------------------------------------------------
Event 9 of 12
Start Subroutine
Subroutine Number [2 ]
---------------------------------------------------
Event 10 of 12
Text
[On an Arc] Direction [CW]
Text Center X[0 ] Y[0 ]
Text Radius [1 ]
Start Angle [180 ]
Clearance R[.1 ]
Z Depth Z[-.03 ]
Z Pierce Feedrate F[20 ]
XY Feedrate F[30 ]
X Text Size X[.3 ]
Y Text Size Y[.4 ]
Text String [MILLTRONICS ]
189