System information

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)
Active On
Power-up
Modal One Shot
25 Circular finish inside X
26 Circular finish outside X
28-30 Reference point return X
31 Z to clearance X
32 Z to tool change X
33 Facing cycle X
34 Rectangular pocket clear X
35 Rectangular finish inside X
36 Rectangular finish outside X
39 Threading mill cycle X
40 Cutter compensation cancel X X
41 Cutter compensation left X
42 Cutter compensation right X
43 H offset added X
44 H offset subtracted X
45 Auto cutter compensation left X
46 Auto cutter compensation right X
47 Auto cutter compensation off
49 Cancel H offset X X
50 Scaling cancel X X
51 Scaling set X
52 Local coordinate system set X
53 Machine coordinate system X
54 Work coordinate 1 system (G540...G549) X X
55-59 Work coordinate 2-6 system (G5#0...G5#9) X
60 Single direction positioning X
61 Exact stop mode X
63 Tapping mode X
64 Cutting X X
65 Non-movement / Program Call X
68 Set rotation X
69 Cancel rotation X X
70 Cancel mirror X X
71 Set mirror X
192