System information

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)
Program 3
Programmed path
G1 X0 Y0
X7 Y6 (estimated start point)
G2 R1.5 XC4 YC2 X5 Y.2 (estimated end point)
G1 X5 Y0
Path generated by Program 3
In general, when dealing with lines and arcs, if the line is programmed short of the arc it will be
extended to the arc. If the line is programmed past the arc it will be shortened to the arc, and if
the line does not intersect the arc it will be made tangent.
203