System information

SECTION ONE – PROGRAM CONFIGURATION
Subprograms can be used to build part libraries of commonly used patterns and can reside
anywhere in memory.
Command format ranges
The basic address and command value ranges are listed in the table below. Note these figures
give the maximum numerical limit for the control. These limits will always be greater than or
equal to the physical limits of the machine. The machine limits are set via parameters in the
machine setup section of the control.
Command Format Ranges
FUNCTIONS COMMAND
LETTER
INCH INPUT METRIC INPUT
Subprogram # and
Program #
O 1 - 9999 1 - 9999
Sequence # N 1 - 99999 1 - 99999
Preparatory
function
G 0 - 999 0 - 999
Dimension * words XYZUVWQ
ABCIJKRP
0 ± 999.9999 0 ± 9999.9999
Dwell P .01 - 9999.99 .01 - 9999.99
Feedrates * F .1 - 999.9 .1 - 9999
Spindle speed * S 1 - 99999 1 - 99999
Tools T 0 - 99 0 - 99
Misc. function M 0 - 999 0 - 255
Repeat or loop L 0 - 999 0 - 999
*These functions have selectable decimal positions. There may be any number of leading or
trailing places as long as the total number of digits fits in the field.
9