System information

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)
Rectangular Finish Inside Program
N1 G20 G90 (Inch/Absolute)
N2 S1000 M3 D1 G43 H1 (spindle CW-1000 RPM, calls tool #1's offsets)
N6 P153=0 (X-Y finish stock)
N3 G00 X0 Y0 (rapids to center of rectangle)
N4 F20 (X-Y feedrate)
N5 P150=.25 (corner radius)
N7 P154=0 (Z finish stock)
N8 P151=4 (X pocket dimension)
N9 P152=2 (Y pocket dimension)
N10 G35 G99 G42 G2 R.1 P199=1 Z-.5 V-.3 Q.2 F5
*1 *2 *3 *3 *4 *5 *6 *7 *8 *9
*1 Executes rectangular finish inside
*2 Returns Z to clearance plane
*3 CW right or "G41 G3" CCW left
*4 Clearance plane
*5 Ramp Z down
*6 Final Z depth
*7 First Z depth (If no V is specified the 1
st
Z depth is the clearance plane
minus the Z increment)
*8 Z increment
*9 Z feedrate
227