System information

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)
Outside Polygon Program
G0 Z2
G65 X2 Y3 (Center)
F20 (XY Feedrate)
P126=3 (Radius to the corner)
P127=60 (Angle to the 1
st
corner)
P125=3 (Number of sides)
P128=.1 (Corner radius)
P132=1 (Inside/outside)
The above program creates the part below.
G666 G98 G2 G41 R.1 P199=0 Z-1 V-.2 Q.2 F5
*1 *2 *3 *3 *4 *5 *6 *7 *8 *9
*1 Executes the polygon cycle
*2 Returns Z to the initial position
*3 Climb cut CW/left
*4 Clearance plane
*5 Plunge Z down
*6 Final Z depth
*7 1
st
Z depth
*8 Z increment
*9 Z feedrate
233