System information

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)
The cycle can be used to clear around islands.
Sample program with islands:
X0
G2 R.3 AA180 AB180
G47
G47
P145=10 (Z Feedrate)
F321 (XY Feed-rate to clear the pocket)
G271 P1234 Q1235 R.1 Z-1 D.1 I.05
('R' is the R plane, 'Z' is the Z-depth, 'D' is the Cut Width and 'I' is
the Finish Stock)
N1234 (The 'P' specifies the start of the pocket)
G41 G65 X0 Y1
G0 X0 Y0
G1 X2
Y1
G3 R1 AA-90 AB90
G1 Y4
Y0
G65 X1 Y0
G40
P516 = 1 (Specifiles and Island)
G45 G0 X1 Y1
G47
P516 = 1 (Specifiles and Island)
G45 G0 X1 Y2
G2 R.3 AA180 AB180
P516 = 1 (Specifiles and Island)
G45 G0 X1 Y3
G2 R.3 AA180 AB180
N1235 (The 'Q' specifies the end of the pocket)
299