System information

SECTION TWO - FRONT PANEL OPERATION
F4 (Run) Main-Run
(The machine must be homed prior to running a program)
The F4 (Run) key is used to execute the active program. Upon depressing the F4 (Run) key, the
following screen appears.
After the above screen appears, F1 (Start) must be pushed and the following screen will appear.
(Note: if the machine is equipt with an automatic tool changer, the operator will be requested to
verify the tool number that is in the spindle)
F1 (First) is automatically selected when this screen is displayed. Therefore, if one desires to run
the active program from the beginning, one need only depress Cycle Start. If F2 (Block) is
20