System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 2 of 10
Tool Pierce - Start Mill Cycle
Z Pierce Feedrate [5 ]
Return Point [Clearance]
Clearance [.1 ]
Final Z Depth [-.375 ]
1st Z Depth [-.375 ]
Z Increment [1 ]
X Pierce Point X[0 ]
Y Pierce Point Y[0 ]
Compensation [Auto Right]
Options [---]
---------------------------------------------------
Event 3 of 10
Mill Geometry - Line
Feedrate F[ ]
Coordinates [Cartesian]
X axis X[ ]
Y axis Y[-1.5 ]
Z axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 4 of 10
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CCW]
Center [Abs Center]
Arc Radius R[1 ]
Arc Center XC[1 ]
YC[-1.5 ]
End Point [Polar]
End Angle AB[-45 ]
Z[ ]
End Option [---]
---------------------------------------------------
356