System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 5 of 10
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CW]
Center [Abs Center]
Arc Radius R[1.4142 ]
Arc Center XC[2.7071 ]
YC[-3.197 ]
End Point [Polar]
End Angle AB[-45 ]
Z[ ]
End Option [---]
---------------------------------------------------
Event 6 of 10
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CCW]
Center [Abs Center]
Arc Radius R[1 ]
Arc Center XC[4.4142 ]
End Angle AB[0 ]
---------------------------------------------------
Feedrate F[ ]
End [---]
YC[-1.5 ]
End Point [Polar]
Z[ ]
End Option [---]
Event 7 of 10
Mill Geometry - Line
Coordinates [Cartesian]
X axis X[ ]
Y axis Y[0 ]
Z axis Z[ ]
Extend Back [Off ]
---------------------------------------------------
357