System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 4 of 9
Connect two arcs with tangent line or arc
in the Plane [XY]
Mill First arc in direction [CCW]
YC2 [-1.5 ]
Exit 1st arc [Right]
Arc Radius R[1 ]
YC[-1.5 ]
End Angle AB[0 ]
R1 [1 ]
XC1 [1 ]
YC1 [-1.5 ]
Second Arc for computation is:
R2 [1 ]
XC2 [4.4142 ]
Enter 2nd arc Right]
Connect with [an Arc]
Center to the [Right]
Radius [1.4142 ]
Arc Direction [CW]
---------------------------------------------------
Event 5 of 9
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CCW]
Center [Abs Center]
Arc Center XC[4.4142 ]
End Point [Polar]
Z[ ]
End Option [---]
---------------------------------------------------
363