System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 4 of 11
Connect two arcs with tangent line or arc
in the Plane [XY]
Mill First arc in direction [CW]
R1 [1 ]
XC1 [2 ]
YC1 [0 ]
Connect with [a Line]
Direction [CW]
Arc Radius R[1 ]
End Point [Absolute]
Z[ ]
Second Arc for computation is:
R2 [2 ]
XC2 [4 ]
YC2 [2 ]
Exit 1st arc [Left]
enter 2nd arc [Left]
---------------------------------------------------
Event 5 of 11
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Center [Abs Center]
Arc Center XC[4 ]
YC[2 ]
X[5 ]
Y[2 ]
End Option [---]
---------------------------------------------------
377