System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 3 of 10
Mill Geometry - Line
Feedrate F[25 ]
Coordinates [Cartesian]
X axis X[ ]
Y axis Y[-2 ]
Z axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 4 of 10
Three Point Circle Generator
Plane [XY]
Direction [CW]
X1 [0 ] Y1 [-2 ]
X2 [1 ] Y2 [-3 ]
X3 [0 ] Y3 [-4 ]
Use X3,Y3 as End Point [No]
End Angle [300 ]
---------------------------------------------------
Event 5 of 10
Three Point Circle Generator
Plane [XY]
Direction [CCW]
X1 [.1213 ] Y1 [-2.2929 ]
X2 [2.1213 ] Y2 [-4.2929 ]
X3 [4.1213 ] Y3 [-2.2929 ]
Use X3,Y3 as End Point [No]
End Angle [300 ]
---------------------------------------------------
Event 6 of 10
Three Point Circle Generator
Plane [XY]
Direction [CW]
X1 [4.2426 ] Y1 [-4 ]
X2 [3.2426 ] Y2 [-3 ]
X3 [4.2426 ] Y3 [-2 ]
Use X3,Y3 as End Point [Yes]
---------------------------------------------------
390