System information

SECTION SEVEN - SAMPLE PROGRAMS
Sample 5
EIA Program Sample 5
N1 T1 M6
N2 G42 D1 S3000 M03
N3 G65 X99 Y0
N4 G0 X0
N5 G43 H1 Z.1 M8
N6 G1 Z-.375 F5
N7 Y2 F25
N8 G2 XC2 YC2 AB45 R2,R.0001
N9 X5 YC2 AB0 R2
N10 G1 Y0
N11 X0
N12 G65 Y99
N13 G40
N14 G0 Z.1 M9
N15 M5
Explanation of EIA Program 5
N1 Tool change #1
N2 Selects right cutter compensation, calls tool #1's "D" offset, and turns on spindle
CW (3000 rpm)
N3 Establishes a "point before pierce" of X99 Y0
Note: Machine does not move to this position.
392