System information

SECTION SEVEN - SAMPLE PROGRAMS
Event 3 of 9
Mill Geometry - Line
Feedrate F[25 ]
Coordinates [Cartesian]
X axis X[ ]
Y axis Y[2 ]
Z axis Z[ ]
End [---]
Extend Back [Off ]
---------------------------------------------------
Event 4 of 9
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CW]
Center [Abs Center]
Arc Radius R[2 ]
Arc Center XC[2 ]
YC[2 ]
End Point [Polar]
End Angle AB[45 ]
Z[ ]
End Option [Round Corner]
Radius [.0001 ]
---------------------------------------------------
Event 5 of 9
Mill Geometry - Arc
Plane [XY]
Feedrate F[ ]
Direction [CW]
Center [Abs Center]
Arc Radius R[2 ]
Arc Center XC[4.8284 ]
YC[2 ]
End Point [Polar]
End Angle AB[0 ]
Z[ ]
End Option [---]
---------------------------------------------------
395