System information

SECTION TWO - FRONT PANEL OPERATION
F3 (Wind) Main-Run-Displ-Graph-Wind
The F3 (Wind) key selects the window function which allows the operator to window in on a
particular area of the part. The following display will appear when F3 (Wind) is selected.
The crosshair which appears on the screen can be moved around using the numeric keys or arrow
keys F7 thru F10 (the same as pan). To zoom in using a window, move the cursor to the first
corner of the window area and depress F5 (Enter) or Enter. Then move the cursor around until
the desired area of the part to be viewed is enclosed in the rectangular box being drawn on the
screen. Next, press Enter. The area enclosed in the box will now be displayed on the entire
screen. After depressing Enter to window on the part, window cancels itself and returns to the
graphic screen.
The X Y coordinates on the lower left side of the screen indicate the position of the cursor,
relative to part zero. The X Y coordinates on the lower right side of the screen indicate the size
of the window. These numbers can be used as a quick reference of the part size and dimensions.
F4 (Auto) Main-Run-Displ-Graph-Auto
The F4 (Auto) key selects the auto zoom function. This function automatically scales and centers
all machine parts on the screen.
F5 (Zoom-) Main-Run-Displ-Graph-Zoom-
The F5 (Zoom) key selects the zoom- function which decreases the size of the part currently
being displayed on the screen by half. Generally, this function is used to view a larger portion of
the part.
27